The CleanBoss Clean Cleaner Cabinet Dispenser is designed to handle up to 4 QuickMix Pro products, featuring a locking cabinet for secure storage. It supports both bottle and bucket filling, offering versatile usage. Ideal for efficient and controlled chemical dispensing.
- ◄Installation Instructions
-
- Mount Wall Bracket: Choose a location near a water source. Level and mark (3) mounting holes for the wall bracket. Drill (3) 5/16” holes, install anchors, and secure the bracket with screws and washers.
Note: The distance from the top of the bracket to the top of the cabinet is 1/8”.
- Mount Cabinet: Align the cabinet with the bracket, ensuring the tabs fit and the central snap engages. Mark the (2) lower holes, then remove the cabinet. Drill (2) 5/16” holes, install anchors, and secure the cabinet to the wall.
- Connect Tubes: Attach the supply tubes to concentrate containers. For the 1 GPM eductor, use an 8-inch minimum discharge tube. Longer tubes (6 feet) are needed for the 3.5 GPM eductor. Do not remove flooding rings and install a hose hook on longer tubes.
- Water Supply: Connect a 3/8” ID water supply hose to the inlet swivel. Ensure water pressure is 25-85 PSI and temperature does not exceed 120°F.
- Secure Cabinet: Reattach the cabinet and secure the bottom with the provided screws.
Note: The bottom (2) screws are required.
- Install Drip Tray: Attach the optional drip tray by aligning tabs with slots and pushing down.
- Medallion Cover Maintenance: For maintenance, remove the medallion cover by pushing in the snap features and rotating upwards. Access snaps by unlocking and opening the doors.
- Reattach Medallion Cover: Insert the upper tabs into the slots, swing down, and engage the lower snaps. Ensure proper alignment of selector knobs.
